installing a steam bath %c2%96 part one
Accomplish you adulation steam baths? Air that you can’t survive without them? If you are one of those who alive for steam, accede getting a steam bath installed in your at ease. Having your own is the bitter borderline for abounding steam bath lovers and getting one may be easier (and less expensive) than you anticipate.

There are two basic choices when installing a steam bath in your at ease. You can convert your existing bathtub or shower or you can install a modular steam bath. There are several steam bath designs which are self-contained and simply charge adapted plumbing and electrical connections.

Converting an existing bathtub is again fairly accessible. A steam proof door must be installed and a steam generator must be connected to the bathtub enclosure.

Preparation

Steam is a highly penetrating anatomy of moisture, so any room that has a steam bath must be properly prepared to prevent moisture damage. If steam gets into the infrastructure of your abode it can statement austere structural damage.

If you are in the action of constructing a advanced abode, it is a child’s play matter to accept the builders statement the proper materials to steam proof your bathroom. If you are installing a steam bath in an existing abode, you must verify that the bathroom can withstand steam.

The basic principals in protected steam bath installation are to 1) prevent the steam from escaping, 2) collect the condensed baptize without dripping on the bathers, and 3) acquiesce the baptize to extract. To accomplish these three goals, the steam room must be completely sealed and insulated, it must accept a sloping ceiling, and it must accept proper drains.

To prevent steam from escaping beyond the steam bath, the structural materials should be waterproof and accept an underlying vapor barrier of thick plastic. Sheetrock or plaster must be designed to withstand moisture or covered with a waterproof finish.

The walls and ceilings of the steam room must be covered in a impervious material according to ceramic tile or glass. All the joints and connections must be sealed with silicone to prevent any moisture from escaping.

Once the underlying structure has been prepared, the abutting affair to accede is the height of the ceilings. In adjustment to maximize steam body-up and prevent algid spots, the ceiling should be lower than 8 feet aerial. It should again be slanted to acquiesce condensation to slide down the ceiling rather than drip on the bathers. A slope of 2 inches per foot is adapted for a steam bath.

If you are converting a bathtub into a steam bath, you charge to enclose it with a suitable door. Baby steam areas (the size of the bathtub) should accept a narrow opening at the bottom of the door to acquiesce for airflow. Larger steam rooms can be fabricated airtight.

The bathroom should still be constructed to contain steam even if you are installing a modular steam shower. These units contain steam appealing able-bodied but still release moisture into the surrounding bathroom area. Modular steam showers accept the advantage of having extra features such as multiple shower heads, built-in seating, lighting, and even CD players and telephones.

But no matter whether you are installing a modular steam shower or converting an existing bathtub into a steam shower, you still charge to select and install a steam generator and all the connectors and accomplish sure that everything is working correctly. That is the topic of our abutting article.

About the author:
This article provided courtesy of http://www.bath-adviser.com





Originall posted November 12, 2012